Engine Bearings & Seals
All Balls Racing Crankshaft Oil Seal
$11.99
• High quality crankshaft oil seal
• Special PTFE coated inner seal lip for increased durability and reduced drag
• Half the cost of OEM
• Sold individually
• Special PTFE coated inner seal lip for increased durability and reduced drag
• Half the cost of OEM
• Sold individually
Crankshaft Bearing - Koyo
$19.99
• Same exact crankshaft bearing used by Kawasaki
• Replaces discontinued Kawasaki part # 92045-1205 which retailed for $25.65
• Unsurpassed quality and fitment
• Made in Japan
• Replaces discontinued Kawasaki part # 92045-1205 which retailed for $25.65
• Unsurpassed quality and fitment
• Made in Japan
Bearing Kits - ORI:
Transmission Shift Drum Bearing - Right Case
$15.99
• Premium engine ball bearing
• Placement: Right crankcase behind shift drum gear holder
• Replaces OEM Kawasaki part # 92045-036 and 92045-1261
• Made in Japan
• Placement: Right crankcase behind shift drum gear holder
• Replaces OEM Kawasaki part # 92045-036 and 92045-1261
• Made in Japan
Transmission Counter Shaft Bearing - Left Case
$15.99
• Premium Koyo engine ball bearing
• Placement: Left crankcase behind the sprocket
• Replaces OEM Kawasaki part # 92045-1115
• Made in Japan
• Placement: Left crankcase behind the sprocket
• Replaces OEM Kawasaki part # 92045-1115
• Made in Japan
Balancer Bearing - Right Case
$27.99
• Premium URB engine ball bearing
• Placement: Right crankcase in front of crankshaft
• Replaces discontinued OEM Kawasaki part # 92045-1116
• Made in Romania
• Placement: Right crankcase in front of crankshaft
• Replaces discontinued OEM Kawasaki part # 92045-1116
• Made in Romania
Transmission Main Shaft Bearing - Right Case
$17.99
• Premium Koyo engine ball bearing
• Placement: Right crankcase behind clutch basket
• Replaces OEM Kawasaki part # 92045-1134
• Made in Japan
• Placement: Right crankcase behind clutch basket
• Replaces OEM Kawasaki part # 92045-1134
• Made in Japan
Transmission Counter Shaft Bearing - Right Case
$15.99
• Premium Koyo engine ball bearing
• Placement: Right crankcase behind kick start idler gear
• Replaces OEM Kawasaki part # 92045-1194
• Made in Japan
• Placement: Right crankcase behind kick start idler gear
• Replaces OEM Kawasaki part # 92045-1194
• Made in Japan
Balancer Bearing - Left Case
$14.99
• Premium Koyo engine ball bearing
• Placement: Left crankcase balancer housing in front of crankshaft
• Replaces discontinued OEM Kawasaki part # 92045-1193
• Made in Japan
• Placement: Left crankcase balancer housing in front of crankshaft
• Replaces discontinued OEM Kawasaki part # 92045-1193
• Made in Japan
KIPS Power Valve Bearing - Right Case
$5.99
• Premium engine ball bearing
• Placement: Right crankcase above crankshaft bearing
• Replaces OEM Kawasaki part # 92045-1010, 92045-1211 and 92045-1304
• Made in Japan
• Placement: Right crankcase above crankshaft bearing
• Replaces OEM Kawasaki part # 92045-1010, 92045-1211 and 92045-1304
• Made in Japan
Transmission Main Shaft Bearing - Left Case
$14.99
• Premium Koyo engine ball bearing
• Placement: Left crankcase behind case saver mounting tabs
• Replaces discontinued OEM Kawasaki part # 92045-1193
• Made in Japan
• Placement: Left crankcase behind case saver mounting tabs
• Replaces discontinued OEM Kawasaki part # 92045-1193
• Made in Japan
Transmission Bearing Kit – Complete
$125.99
• Start your rebuild right with all new high quality crankcase transmission bearings
Complete kit includes:
• Balancer bearings, replaces OEM part #’s 92045-1116 and 92045-1193
• Main shaft bearings, replaces OEM part #’s 92045-1134 and 92045-1193
• Counter shaft bearings, replaces OEM part #’s 92045-1194 and 92045-1115
• Shift drum bearing, replaces OEM part # 92045-036 (supersedes 92045-1261)
• KIPS power valve bearing, replaces OEM part # 92045-1304 (supersedes 92045-1010 & 92045-1211)
• We only sell high quality engine bearings that meet or exceed OEM specs
• Most bearings are made in Japan by Koyo
• The brand name of each bearing is subject to change however the quality will remain the same
• Kawasaki has discontinued some of these transmission bearings
• Crankshaft bearings, clutch basket bearing, and clutch cover bearings are NOT included in this kit
Complete kit includes:
• Balancer bearings, replaces OEM part #’s 92045-1116 and 92045-1193
• Main shaft bearings, replaces OEM part #’s 92045-1134 and 92045-1193
• Counter shaft bearings, replaces OEM part #’s 92045-1194 and 92045-1115
• Shift drum bearing, replaces OEM part # 92045-036 (supersedes 92045-1261)
• KIPS power valve bearing, replaces OEM part # 92045-1304 (supersedes 92045-1010 & 92045-1211)
• We only sell high quality engine bearings that meet or exceed OEM specs
• Most bearings are made in Japan by Koyo
• The brand name of each bearing is subject to change however the quality will remain the same
• Kawasaki has discontinued some of these transmission bearings
• Crankshaft bearings, clutch basket bearing, and clutch cover bearings are NOT included in this kit
Water Pump Bearing
$4.50
• Premium NTN engine ball bearing
• Placement: Clutch cover behind water pump seal
• Replaces OEM Kawasaki part # 92045-1048
• Made in Japan
• Placement: Clutch cover behind water pump seal
• Replaces OEM Kawasaki part # 92045-1048
• Made in Japan
Clutch Pressure Plate Bearing
$6.99
• Premium engine ball bearing
• Placement: Center of clutch pressure plate
• Replaces OEM Kawasaki part # 601B6001
• Made in Germany
• Placement: Center of clutch pressure plate
• Replaces OEM Kawasaki part # 601B6001
• Made in Germany
KIPS Power Valve Bearing - Clutch Cover
$4.50
• Premium engine ball bearing
• Placement: Clutch cover recessed hole under oil filler plug
• Replaces OEM Kawasaki part # 92045-1048
• Made in Japan
• Placement: Clutch cover recessed hole under oil filler plug
• Replaces OEM Kawasaki part # 92045-1048
• Made in Japan
Clutch Bearing Kit
$14.99
• Start your rebuild right with all new high quality clutch & clutch cover bearings
Kit includes:
• Water pump bearing, replaces OEM Kawasaki part # 92045-1048
• KIPS clutch cover power valve bearing, replaces OEM Kawasaki part # 92045-1048
• Clutch pressure plate bearing, replaces OEM Kawasaki part # 601B6001
• We only sell high quality engine bearings that meet or exceed OEM specs
• Most bearings are made in Japan by Koyo
• The brand name of each bearing is subject to change however the quality will remain the same
• Clutch basket needle bearing and clutch release lever bearing are NOT included in this kit
Kit includes:
• Water pump bearing, replaces OEM Kawasaki part # 92045-1048
• KIPS clutch cover power valve bearing, replaces OEM Kawasaki part # 92045-1048
• Clutch pressure plate bearing, replaces OEM Kawasaki part # 601B6001
• We only sell high quality engine bearings that meet or exceed OEM specs
• Most bearings are made in Japan by Koyo
• The brand name of each bearing is subject to change however the quality will remain the same
• Clutch basket needle bearing and clutch release lever bearing are NOT included in this kit
Bearings - ORI:
Crankshaft Bearing And Seal Kit
$59.99
• Includes (2) Koyo crankshaft bearings and (2) PTFE crankshaft oil seals
• Exact crankshaft bearings used by Kawasaki (Replaces discontinued OEM crank bearing 92045-1205)
• High quality crank seals use a PTFE coated inner seal lip for increased durability and reduced drag
• These are not the generic, less expensive nitrile crank seals found in other kits
• Exact crankshaft bearings used by Kawasaki (Replaces discontinued OEM crank bearing 92045-1205)
• High quality crank seals use a PTFE coated inner seal lip for increased durability and reduced drag
• These are not the generic, less expensive nitrile crank seals found in other kits
Oil Seals:
Winderosa Complete Oil Seal Kit
$17.95
• Includes all the oil sets to rebuild (1) complete motor at an affordable price
• Includes (2) crank seals, (1) counter shaft seal, (1) shift lever seal, (1) kick start seal (1) governor rod seal
• (1) KIPS operating rod seal, (1) clutch arm seal, (1) water pump seal
*The nitrile crank seals are not PTFE high quality crank seals
• Includes (2) crank seals, (1) counter shaft seal, (1) shift lever seal, (1) kick start seal (1) governor rod seal
• (1) KIPS operating rod seal, (1) clutch arm seal, (1) water pump seal
*The nitrile crank seals are not PTFE high quality crank seals
ORI Water Pump Seal
$8.99
• ORI 2 piece water pump oil seal set
• Replaces the fragile expensive OEM water pump oil seal
• Can be installed from EITHER side of the clutch cover unlike the OEM seal
• Adds 2 additional sealing contact points on the water pump shaft
• Includes (2) oil seals and installation instructions
• Replaces the fragile expensive OEM water pump oil seal
• Can be installed from EITHER side of the clutch cover unlike the OEM seal
• Adds 2 additional sealing contact points on the water pump shaft
• Includes (2) oil seals and installation instructions
OEM Kawasaki Oil level Gauge, Site Window
$8.99
• Genuine Kawasaki part # 52005-0019
• OEM quality and fitment
• Supercedes part #’s 52005-1005, 52005-1055
• OEM quality and fitment
• Supercedes part #’s 52005-1005, 52005-1055
Kawasaki Tecate 4
All orders must be called in
1-845-915-6851
1-845-915-6851
or 1-845-238-5086
