2009 Off-Road Innovation. All rights reserved.
Return Policy
Shipping
Warranty
Impact Driver
Reversible, Loosen or tighten screws & bolts on impact with ease
Includes 4 bits (# 2 and # 3 Phillips bits & 8 and 10mm slotted bits)
A must have in every toolbox
$15.99
Measuring Cup
The original liquid measuring cup, takes the guess work out of pre-mix
Measures in pints, cc's, fluid ounces and by premix ratios per gallon
Durable, easy to clean plastic construction
A must have for all two stroke owners
$4.99
Crankcase Splitter/Separator
Works on most 2 & 4-stroke engines with vertically split cases
Movable fingers allow a multitude of bolt patterns to be used
Included 6mm & 8mm mounting bolts
Heavy Duty design eliminates binding under heavy loads
Easily removes Kawasaki Tecate flywheels
Professional quality tool
Retails for $175.99
$159.99
Tools

Motion Pro:

Ratio Rite:

K&L:

T-Handle Set - 9 Piece
Includes 8,10,12,13,14,17,19mm T-handle deep sockets & #2 and #3 T- handle Phillips screwdrivers
Made from quality chrome vanadium steel
Deep socket design to fit most applications
310mm length
T-Handles are also available separately
$39.99

Tusk:

Kawasaki tecate motion pro crankcase splitter separator and flywheel puller tool 08-0245
Spring Puller Tool
Used to remove exhaust pipe springs and other springs
Made in the U.S.A.
$8.99
Tire Iron - 16" Curved
Measures 16" x 1" x 1 3/4"
Both ends are curved for better leverage and grip
Made from cold forged steel
Sold Individually
ATV tire service requires at least (2) tire irons
 $15.99
Blind Bearing Remover Set
Easily removes bearings and bushings that cannot be driven out
Applications include bearings located in engine cases, wheels, suspension parts, etc.
Includes 2 lb slide hammer, 30,25,20,17,15,12,10,8mm collets and plastic case
Crossbar type shaft allows easy collet removal
Professional quality tools
Retails for $227.99
$197.99
Gear Jammer
Locks engine gears in place safely for service work
Allows tightening lock nuts to proper torque settings
Powerful magnet holds tool in place during use
Billet 6061 T-6 Aluminum construction
Not for use with impact guns
$18.99
T-Handle Set - Pro Racer
Includes 8,10,12,14mm T-handle sockets & #2 and #3 T-handle Phillips screwdrivers
Durable nickel pewter finish
Includes a vinyl storage pouch
Lifetime replacement warranty on T-Handle sockets
One year warranty on the T-Handle screwdrivers
$38.99
T-Handle Driver - 3/8" Drive
Use any 3/8" drive attachments such as sockets, hex drives, etc.
10.5" in length
Chrome-vanadium tool steel shaft
Durable nickel pewter finish
Lifetime replacement warranty
Eliminates the need for a complete T-Handle set
$10.50
T-Handle Driver - 1/4" Drive
Use any 1/4" drive attachments such as sockets, hex drives, etc.
8.5" in length
Chrome-vanadium tool steel shaft
Durable nickel pewter finish
Lifetime replacement warranty
Eliminates the need for a complete T-Handle set
$9.99
Auxiliary Fuel Tank
For shop use when starting and tuning bike with fuel tank removed
Screw on top with O-ring seal
Includes 4 ft. of 1/4" fuel line and in-line petcock
$54.99
Tire Iron Set
Includes (3) tire iron sizes: 8.5", 11", and 16"
16" Tire iron has dual curved ends for better leverage and grip
Variety of sizes to ease installation and removal of tires
$31.99
Allen Wrench Set - 9 Piece Ball End
Made of chrome-vanadium tool steel
Sizes included 1.5,2,2.5,3,4,5,6,8 & 10 mm
Ball end allows for better access to allen-head bolts
Convenient holder included
$16.99
Chain Press Tool - Mini
Fits most 520 and 530 standard and O-ring chains
Used to press on side plates
Hex key wrench is included with tool
Perfect addition for tool packs
Made in the U.S.A.
$16.99
Chain Breaker Tool
Original Motion Pro design
Fits 420 to 530 chain
Will push link pin completely through link / side plate
Handle folds away for easy storage
Replaceable pin is heat treated for strength and wear resistance
Will not work on EK 530 MVO/MVX
Max pin extension to drive out chain links is 18mm
$26.99
T-Handle Set - 6 Piece
Includes 8,10,12,14mm T-handle deep sockets & #2 and #3 T-handle Phillips screwdrivers
Similar to Motion Pro's Pro Racer T-handle set
Made from quality chrome vanadium steel
Deep socket design to fit most applications
310mm length
T-Handles are also available separately
$25.99
Spring Puller Tool
Exhaust spring puller makes removing exhaust springs a simple task
Economically priced
$5.99
T-Handle Rack
T-Handle rack holds up to 11 tools
Mount to your shop/trailer wall or hang on your toolbox
Allows simple 1 screw wall mounting unlike similar racks
Durable, light weight aluminum construction
$15.99
Tire Iron - 15" Curved
Unique curved design allows easier tire installation and removal
Durable forged steel construction
Sold Individually
ATV tire service requires at least (2) tire irons
$10.99
Tire Iron - 17" Mega
Long, heavy-duty tire iron for increased leverage
Comfortable aluminum handle for added control and durability
Wide spoon area ensures smooth action and prevents rim nicks
Sold Individually
ATV tire service requires at least (2) tire irons
$17.99
Chain Breaker Tool
Easily breaks the chain in seconds
Quality construction yet economically priced
Fits all chain sizes
$12.99
Blind Bearing Remover Set
Easily removes bearings and bushings that cannot be driven out
Applications include bearings located in engine cases, wheels, suspension parts, etc.
Works with bearings that have inner diameters measuring 8mm-30mm
Includes slide hammer, 30,25,20,17,15,12,10,8mm collets and plastic case
Made from durable hardened steel
Economically priced
$83.99
Crankcase Splitter / Separator
A must for disassembling vertically split 2 and 4-stroke crankcases
Makes crankcase disassembly easy by safely pushing the crank assembly out of the case halves
Adjustable arms permit it to be used on a variety of bolt patterns
Includes both 8mm and 6mm mounting bolts
Economically priced for the do it yourself mechanic
$59.99
Spark Plug Wrench
Made for most two-stroke water cooled motorcycles and ATVs
Low profile design for tight spots
Fits common 13/16" (19mm) spark plugs
$6.50
Spark Plug Wrench - Ratcheting
Made for most two-stroke water cooled motorcycles and ATVs
Ratchet design for easy installation and removal of spark plugs
Low profile design for tight spots
Fits common 13/16" (19mm) spark plugs
$8.99
Crank Bearing / Gear Puller
Safely removes crank bearings and gears from crankshafts
Typically one or both crank bearings remain on the crankshaft during
disassembly of vertically split crankcases. Due to clearance issues this tool is necessary to reach behind the crank bearings and remove them without damaging the crankshaft
Removes bearings and gears up to 80mm in diameter
Economically priced
$62.99
Spark Plug Wrench
Made for most two-stroke water cooled motorcycles and ATVs
Low profile design for tight spots
Can be stored in most ATV tool boxes
Fits common 13/16" (19mm) spark plugs
$7.50

Ricochet:

Spring Puller Tool
Makes removing and installing exhaust springs extremely easy
$8.50

FMF:

Motion pro exhaust pipe puller tool 08-0065 Motion pro curved 16 inch tire iron tool 08-0007 Motion pro blind bearing remover tool set 08-0292 Motion pro gear jammer holder tool 08-0427 Motion pro pro racer t handle set 08-0145 Motion pro 3/8 drive t handle tool 08-0159 Motion pro 1/4 drive t handle tool 08-0158 Motion pro auxiliary fuel tank 08-0032 Motion pro tire iron set 08-0049 Motion pro 9 piece allen wrench set with ball ends 08-0185 Motion pro chain breaker tool 08-0001 Motion pro mini chain press tool 08-0070 Ratio rite pre mix measuring cup must have for two stroke owners KL impact driver tool removes stubborn bolts and screws 35-8884 Tusk exhaust spring puller tool 19-6010 Tusk t handle tool holder rack Tusk 15 inch curved tire iron Tusk 17 inch mega tire iron Tusk chain breaker tool Tusk blind bearing remover set Tusk crankcase splitter separator tool Tusk spark plug wrench 13/16 19 mm Tusk bearing and gear puller Ricochet low profile spark plug wrench 13/16 19 mm FMF exhaust spring puller tool 011231
Flywheel Puller
Finally a flywheel puller for the Kawasaki Tecate!
Heavy duty design includes puller, handle, (3) heavy duty 6mm bolts and instructions
Safely removes Kawasaki Tecate flywheels properly without damage to the flywheel, stator or crank
No more jaw type pullers and damaged parts
Other companies continue to sell flywheel pullers they claim to fit this model however they do not
Our flywheel puller just plain works
$39.99
Tusk 6 piece t handle tool set
Picture Coming
Soon
Torque Wrench Adapter
$14.99
Chrome-vanadium tool steel with hard nickel pewter finish
Properly torque two-stroke cylinder base nuts and hard-to-reach fasteners
Fits 12 and 14mm nuts and bolts
Extends the reach of any 3/8 inch drive torque wrench by 3 inches
Chart supplied for torque conversions
Check owners manual for proper torque specifications
Axle Nut Wrench
Fits OEM Kawasaki Tecate center axle nuts
Made from hardened steel with laser etched logo and size
Works with both 3/8" and 1/2" ratchets for extra leverage
Compact design for easy storage
$14.99
G-Force:
$25.99
Each
Pair
Cable Lube
Specially formulated for lubricating control cables
$10.99
Cable Luber / Cable Lube Kit
Clamps over the cable and the housing
Designed to be used with aerosol cable lube
Effortlessly injects lubricant through the entire cable housing
Lubricates and rust proofs moving parts even at temperatures below zero
Kit includes Tusk Cable Luber and Champions Choice cable lube
$9.99
$13.99
Luber
Kit
Cable Lube
Lubricates and rust proofs moving parts even at temperatures below zero
$5.99
Champions Choice:
Cable Luber
Lubricates between cable and housing without removing cable
$15.99
Info@Off-RoadInnovation.com
Next
Previous

ORI:

Tusk Crankshaft Puller Installation Tool
Aids in assembling vertically split crankcases
Safely and easily pulls crankshaft assembly into crankcase
Heavy duty steel construction
Includes both male and female 10mm x 1.25 and 12mm x 1.25 adapters and assembly bars
Economically priced
$59.99
Tusk Crankshaft Puller Installation Tool
Service Manual
Genuine discontinued Kawasaki service manual
New and used service manuals are available
Part # 99924-1085-01 or 99924-1085-02
A must have for all Tecate 4 owners
Contains detailed specs, diagrams, and repair instructions
Call

OEM Kawasaki:

Kawasaki Tecate 4
Air Filtration
Billet Parts
Body
Brakes
Chassis Bearings & Seals
Controls
Cooling
Drive
Electrical
Engine - Bottom End
Engine - Top End
Engine Bearings & Seals
Exhaust
Grips
Handlebars
Intake & Fuel
Remanufactured
Seats
Steering
Suspension
Tools
Wheels
Tecate 4 Category Menu
HOMEPAGE
USED ATV
USED DIRT BIKE
FOR SALE
SERVICES
ABOUT US
CONTACT US
PHOTOS
ORI Kawasaki Tecate flywheel puller tool replaces oem tools 57001-259 57001-1099 ORI Kawasaki Tecate flywheel magneto puller tool

Ratio Rite:

**NEW**
All orders must be called in
 1-845-915-6851
or 1-845-238-5086
Oem Kawasaki Tecate service manual 99924-1085-01 99924-1085-02
NEW
USED
ON SALE
REMANUFACTURED
MOJAVE KSF-250
TECATE 3 KXT-250
TECATE 4 KXF-250
TRI Z YTZ250
PARTS